Alcatel-Lucent 7210 SAS M Service Manual page 642

VPRN Service Configuration Commands
netmask — The subnet mask in dotted decimal notation.
data-delay-interval
Syntax data-delay-interval value
no data-delay-interval
Context config>service>vprn>pim>mdt
This command specifies the interval, in seconds, before the provider edge (PE) router connected to
Description
the source switches traffic from default Multicast Distribution Tree (MDT) to the data MDT group.
3 seconds
Default
value — Specifies the data delay interval in seconds.
Parameters
data-threshold
Syntax data-threshold {c-grp-ip-address/mask | c-grp-ip-address netmask} mdt-threshold
Context config>service>vprn>pim>mdt
This command configures the threshold for a group prefix.
Description
grp-ip-address — The multicast group IP address expressed in dotted decimal notation.
Parameters
mask — The mask associated with the IP prefix expressed as a mask length or in dotted decimal
netmask — The subnet mask in dotted decimal notation.
mdt-threshold — Specifies the threshold, in kilo-bits per second (kbps), for the group to which this C-
Page 642
0.0.0.0 — 255.255.255.255 (network bits all 1 and host bits all 0)
Values
3 — 180
Values
224.0.0.0 — 239.255.255.255
Values
notation; for example /16 for a sixteen-bit mask. The mask can also be entered in dotted decmial
notation (255.255.0.0).
4 — 32
Values
0.0.0.0 — 255.255.255.255 (network bits all 1 and host bits all 0)
Values
(S,G) belongs. For a C-group G configured with a threshold, a C-(S,G) is mapped to a Data
Multicast Tunnel (MT) only if the C-(S,G)'s rate exceeds this configured threshold.
7210 SAS M Services Guide