Alcatel-Lucent 7210 SAS M Service Manual page 673

type
Syntax [no] type {internal | external}
Context config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
This command designates the BGP peer as type internal or external.
Description
The type of internal indicates the peer is an IBGP peer while the type of external indicates that the
peer is an EBGP peer.
By default, the OS derives the type of neighbor based on the local AS specified. If the local AS
specified is the same as the AS of the router, the peer is considered internal. If the local AS is
different, then the peer is considered external.
The no form of the command used at the group level reverts to the default value.
The no form of the command used at the neighbor level reverts to the value defined at the group level.
no type — Type of neighbor is derived on the local AS specified.
Default
internal — Configures the peer as internal.
Parameters
external — Configures the peer as external.
ttl-security
Syntax ttl-security min-ttl-value
no ttl-security
Context config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
Configure TTL security parameters for incoming packets.
Description
min-ttl-value — Specify the minimum TTL value for an incoming BGP packet.
Parameters
7210 SAS M Services Guide
1 — 255
Values
1
Default
Virtual Private Routed Network Services
Page 673