Alcatel-Lucent 7210 SAS M Service Manual page 903

Sample Output
A:Dut-A>show>service>id# sdp 1217:305
===============================================================================
Service Destination Point (Sdp Id : 1217:305)
===============================================================================
SdpId
-------------------------------------------------------------------------------
1217:305
7210 SAS M Services Guide
Label
Sdp Id
Type
VC Type
VC Tag
I. Lbl
Admin Path MTU
Oper Path MTU
Far End
Delivery
Admin State
Oper State
Ingress Label
Egress Label
Last Changed
Signaling
Admin State
Oper State
Type IP address
Spok 10.20.1.2
The SDP identifier.
Indicates whether the SDP is spoke.
Displays the VC type: ether, vlan, or vpls.
Displays the explicit dot1Q value used when encapsulating to the SDP
far end.
The VC label used by the far-end device to send packets to this device
in this service by the SDP.
The operating path MTU of the SDP is equal to the admin path MTU
(when one is set) or the dynamically computed tunnel MTU, when no
admin path MTU is set (the default case.)
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
Specifies the type of delivery used by the SDP: GRE or MPLS.
The administrative state of this SDP.
The current status of the SDP.
The label used by the far-end device to send packets to this device in
this service by this SDP.
The label used by this device to send packets to the far-end device in
this service by the SDP.
The date and time of the most recent change to the SDP.
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on this SDP.
The administrative state of the Keepalive process.
The operational state of the Keepalive process.
Adm
Up
VPLS Show Commands
Description
Opr I.Lbl
Up 130506
E.Lbl
130516
Page 903