Alcatel-Lucent 7210 SAS M Service Manual page 378

Virtual Private LAN Services
The no form of this command enables aging on the VPLS service.
no disable-aging
Default
disable-learning
Syntax [no] disable-learning
Context config>service>vpls
config>service>pw-template
config>template>vpls-template
This command disables learning of new MAC addresses in the VPLS forwarding database (FDB) for
Description
the service instance.
When disable-learning is enabled, new source MAC addresses will not be entered in the VPLS
service forwarding database.
When disable-learning is disabled, new source MAC addresses will be learned and entered into the
VPLS forwarding database.
This parameter is mainly used in conjunction with the discard-unknown command.
The no form of this command enables learning of MAC addresses.
no disable-learning (Normal MAC learning is enabled)
Default
discard-unknown
Syntax [no] discard-unknown
Context config>service>vpls
By default, packets with unknown destination MAC addresses are flooded. If discard-unknown is
Description
enabled at the VPLS level, packets with unknown destination MAC address will be dropped instead
(even when configured FIB size limits for VPLS or SAP are not yet reached).
The no form of this command allows flooding of packets with unknown destination MAC addresses
in the VPLS.
no discard-unknown — Packets with unknown destination MAC addresses are flooded.
Default
endpoint
Syntax endpoint endpoint-name [create]
no endpoint
Context config>service>vpls
This command configures a service endpoint.
Description
Page 378 7210 SAS M Services Guide