Alcatel-Lucent 7210 SAS M Service Manual page 841

Sample Output
A:Dut-A# show service id
===============================================================================
Services: Service Destination Points Details
===============================================================================
-------------------------------------------------------------------------------
Description
SDP Id
VC Type
Admin Path MTU
Far End
Admin State
Acct. Pol
Ingress Label
7210 SAS M Services Guide
Label
Ingress Label
Egress Label
Last Changed
Signaling
Admin State
Oper State
Hello Time
Max Drop Count
Hello Msg Len
Hold Down Time
I. Fwd. Pkts.
I. Dro. Pkts
E. Fwd. Pkts.
Associated LSP
List
Sdp Id 1:1 -(10.20.1.2)
: Default sdp description
: 1:1
: Ether
: 0
: 10.20.1.2
: Up
: None
: 2048
Description (Continued)
The label used by the far-end device to send packets to this device in
this service by this SDP.
The label used by this device to send packets to the far-end device in
this service by the SDP.
The date and time of the most recent change to the SDP.
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on this SDP.
The administrative state of the Keepalive process.
The operational state of the Keepalive process.
Transmission frequency of the SDP echo request messages.
Specifies the maximum number of consecutive SDP echo request mes-
sages that can be unacknowledged before the keepalive protocol
reports a fault.
The length of the SDP echo request messages transmitted on this SDP.
Specifies the amount of time to wait before the keepalive operating sta-
tus is eligible to enter the alive state.
Specifies the number of forwarded ingress packets.
Specifies the number of dropped ingress packets.
Specifies the number of forwarded egress packets.
When the SDP type is MPLS, a list of LSPs used to reach the far-end
router displays. All the LSPs in the list must terminate at the IP address
specified in the Far End field.
If the SDP type is GRE, then the following message displays:
SDP delivery mechanism is not MPLS.
1 sdp detail
VLL Show Commands
Type : Spoke
VC Tag : n/a
Oper Path MTU : 9186
Delivery : MPLS
Oper State : Up
Collect Stats : Disabled
Egress Label : 2048
Page 841