Alcatel-Lucent 7210 SAS M Service Manual page 532

IES Global Commands
This command specifies that ICMPv6 host and network unreachable messages are generated by this
Description
interface.
When disabled, ICMPv6 host and network unreachable messages are not sent.
100 10
Default
number — Specifies the number of destination unreachable ICMPv6 messages are issued in the time
seconds — Specifies the time frame in seconds that is used to limit the number of destination
link-local-address
Syntax link-local-address ipv6-address [preferred]
no link-local-address
Context config>service>ies>if>ipv6
This command configures the IPv6 link local address.
Description
local-proxy-nd
Syntax [no] local-proxy-nd
Context config>service>ies>if>ipv6
This command enables local proxy neighbor discovery on the interface.
Description
The no form of the command disables local proxy neighbor discovery.
proxy-nd-policy
Syntax proxy-nd-policy policy-name [policy-name...(up to 5 max)]
no proxy-nd-policy
Context config>service>ies>if>ipv6
This command applies a proxy neighbor discovery policy for the interface.
Description
policy-name — Specifies an existing neighbor discovery policy name. Allowed values are any string
Parameters
Page 532
frame specified by the seconds parameter.
10 — 1000
Values
100
Default
unreachable ICMPv6 messages to be issued.
1 — 60
Values
10
Default
up to 32 characters long composed of printable, 7-bit ASCII characters. If the string contains
7210-SAS M Services Guide