Configuring Ies/Vprn Vrrp Parameters; Configuring Vrrp On Subnets - Alcatel-Lucent 7705 Configuration Manual

Configuring IES/VPRN VRRP Parameters

VRRP parameters can be configured on an interface in a service to provide virtual default
router support that allows traffic to be routed without relying on a single router in case of
failure. VRRP can be configured in the following ways:

Configuring VRRP on Subnets

If you have multiple subnets configured on an IES or VPRN interface, you can configure
VRRP on each subnet.
The following displays an IES interface configuration example:
config>service>ies# info
#------------------------------------------
interface "test-A" create
7705 SAR OS Router Configuration Guide
• Configuring VRRP on Subnets
• Non-owner VRRP
• Owner VRRP
• Deleting VRRP on a Service
address 123.123.123.123/24
exit
interface "testB" create
address 123.123.123.123/24
exit
interface "testB"
address 10.10.14.1/24
secondary 10.10.16.1/24
secondary 10.10.17.1/24
secondary 10.10.18.1/24
exit
no shutdown
VRRP
235