Alcatel-Lucent 7210 SAS M Service Manual page 865

fdb-mac
Syntax fdb-mac ieee-address [expiry]
Context show>service
This command displays the FDB entry for a given MAC address.
Description
ieee-address — The 48-bit MAC address for which to display the FDB entry in the form
Parameters
expiry — Shows the time until the MAC is aged out.
Show FDB-MAC Command Output — The following table describes the show FDB MAC com-
Output
Sample Output
*A:ALA-12# show service fdb-mac 00:99:00:00:00:00
==============================================================================
Services Using Forwarding Database Mac 00:99:00:00:00:00
==============================================================================
ServId MAC
------------------------------------------------------------------------------
1
==============================================================================
*A:ALA-12#
7210 SAS M Services Guide
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
mand output fields:
Label
Service ID
MAC
Source-Identifier
Type/Age
00:99:00:00:00:00
The service ID number.
The specified MAC address
The location where the MAC is defined.
— FDB entries created by management.
Static
Learned — Dynamic entries created by the learning process.
OAM — Entries created by the OAM process.
H — Host, the entry added by the system for a static configured sub-
scriber host.
D or DHCP — DHCP-installed MAC. Learned addresses can be
temporarily frozen by the DHCP snooping application for the duration
of a DHCP lease.
P — Indicates the MAC is protected by the MAC protection feature.
Source-Identifier
sap:1/2/7:0
VPLS Show Commands
Description
Type/Age Last Change
Static
Page 865