Global Services Command Reference - Alcatel-Lucent 7210 SAS M Service Manual

Global Services Command Reference

Command Hierarchies
NOTE: All the CLI commands are not available in both access-uplink mode and network
modes. Commands applicable to each mode is called out explicitly.
Customer Commands
config
Pseudowire (PW) Commands (applicable only for 7210 SAS-M network mode)
config
7210 SAS M Services Guide
• Customer Commands on page 89
• Pseudowire (PW) Commands (applicable only for 7210 SAS-M network mode) on
page 89
• SDP Commands (Applicable only to 7210 SAS-M in network mode) on page 91
• SAP Commands for 7210 SAS-M in Network mode on page 91
• ETH-CFM Configuration Commands on page 93
• SAP Commands for 7210 SAS-M in Access-uplink mode on page 92
• Show Commands on page 94
— service
— [no]
customer
— contact
— no contact
— description
— no description
— [no]
— service
— [no] pw-template
— accounting-policy
— no accounting-policy
— [no]
— [no]
— [no]
— [no]
— [no]
— limit-mac-move
— no limit-mac-move
— [no]
customer-id
contact-information
description-string
phone phone-number
policy-id [use-provisioned-sdp] [create]
acct-policy-id
collect-stats
control-word
disable-learning
disable-aging
discard-unknown-source
{blockable|non-blockable}
vc-type
Subscriber Services
Page 89