Alcatel-Lucent 7210 SAS M Service Manual page 462

Epipe Service Commands
Epipe Service Commands
epipe
Syntax epipe service-id [customer customer-id] [create] [vpn vpn-id][customer customer-id]
[create] [vpn vpn-id] [svc-sap-type {null-star|dot1q|dot1q-preserve|any}] [customer-vid
vlan-id] [pbb-epipe]
no epipe service-id
Context config>service
This command configures an Epipe service instance. This command is used to configure a point-to-
Description
point epipe service. An Epipe connects two endpoints defined as Service Access Points (SAPs). Both
SAPs may be defined in one 7210 SAS.
No MAC learning or filtering is provided on an Epipe.
When a service is created, the customer keyword and customer-id must be specified and associates
the service with a customer. The customer-id must already exist having been created using the
customer command in the service context. Once a service has been created with a customer
association, it is not possible to edit the customer association. The service must be deleted and
recreated with a new customer association.
Once a service is created, the use of the customer customer-id is optional for navigating into the
service configuration context. Attempting to edit a service with the incorrect customer-id specified
will result in an error.
By default, no epipe services exist until they are explicitly created with this command.
The no form of this command deletes the epipe service instance with the specified service-id. The
service cannot be deleted until the service has been shutdown.
service-id — The unique service identification number identifying the service in the service domain.
Parameters
epipe customer
any — When svc-sap-type is set to any, for a NULL SAP, the system processes and forwards only
create — Keyword used to create the service instance. The create keyword requirement can be
customer customer-id — Specifies the customer ID number to be associated with the service. This
Page 462
This ID must be unique to this service and may not be used for any other service of any type. The
service-id must be the same number used for every 7210 on which this service is defined.
1 — 2147483648
Values
packets with no VLAN tag (that is, untagged). All other packets with one or more VLAN tags
(even those with priority tag only) are not processed and dropped. Users can use the service with
svc- sap-type set to null-star, to process and forward packets with one or more tags (including
priority tag) on a null SAP.
null-star
Default
enabled/disabled in the environment>create context.
parameter is required on service creation and optional for service editing or deleting.
1 — 2147483647
Values
7210 SAS M Services Guide