Alcatel-Lucent 7210 SAS M Service Manual page 460

pbb
Syntax
Context
Description
mac-name
Syntax
Context
Description
Parameters
Page 460
b-vpls — Creates a backbone-vpls.
create — This keyword is mandatory while creating a VPLS service.
customer customer-id — Specifies the customer ID number to be associated with the service. This
parameter is required on service creation and optional for service editing or deleting.
1 — 2147483647
Values
customer-vid vlan-id — Defines the dot1q VLAN ID to be specified while creating the local Dot1q
SAP for svc-sap-type dot1q-preserve.
1 — 4094
Default
dot1q-preserve — Specifies that the allowed SAP in the service are Dot1q. The Dot1q ID is not
stripped after packets matches the SAP.
null-star
Default
m-vpls — Specifies a management VPLS.
null-star — Specifies that the allowed SAP in the service are either null SAPs or Dot1q* SAPs.
svc-sap-type — Specifies the type of service and allowed SAPs in the service.
vpn vpn-id — Specifies the VPN ID number which allows you to identify virtual private networks
(VPNs) by a VPN identification number.
1 — 2147483647
Values
null (0)
Default
pbb
config>service
config>service>vpls
This command configures PBB parameters.
mac-name name ieee-address
no mac-name name
config>service>pbb
This command configures the MAC name for the MAC address. It associates an ASCII name with an
IEEE MAC to improve the PBB Epipe configuration. It can also change the dest-BMAC in one place
instead of 1000s of Epipe.
name — Specifies the MAC name up to 32 characters in length.
ieee-address — The MAC address assigned to the MAC name. The value should be input in either a
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx format.
7210 SAS M Services Guide