Alcatel-Lucent 7210 SAS M Service Manual page 913

IGMP Snooping Show Commands
igmp-snooping
Syntax igmp-snooping
Context show>service>id
This command enables the context to display IGMP snooping information.
Description
all
Syntax all
Context show>service>id>igmp-snooping
This command displays detailed information for all aspects of IGMP snooping on the VPLS service.
Description
Show All Service-ID — The following table describes the show all service-id command output
Output
fields:
7210 SAS M Services Guide
Label
Admin State
Querier
Sap or SDP Id
Oper State
Mrtr Port
Send Queries
Max Num Groups
MVR From VPLS
Num MVR Groups
MVR From VPLS Cfg
Drops
MVR To SAP Cfg
Drops
The administrative state of the IGMP instance.
Displays the address of the IGMP querier on the IP subnet to which the
interface is attached.
Displays the SAP or SDP IDs of the service ID.
Displays the operational state of the SAP or SDP IDs of the service ID.
Specifies if the port is a multicast router port.
Specifies whether the send-queries command is enabled or disabled.
Specifies the maximum number of multicast groups that can be joined
on this SAP or SDP.
Specifies MVR from VPLS.
Specifies the actual number of multicast groups that can be joined on
this SAP or SDP.
Displays the from VPLS drop count.
Displays the to SAP drop count.
VPLS Show Commands
Description
Page 913