Alcatel-Lucent 7210 SAS M Service Manual page 463

vpn
customer-vid vlan-id — Defines the dot1q VLAN ID to be specified while creating the local Dot1q
dot1q — Specifies that the allowed SAP in the service are Dot1q SAPs and dot1q explicit null SAPs.
dot1q-preserve — Specifies that the allowed SAP in the service are Dot1q. The Dot1q ID is not
null-star — Specifies that the allowed SAP in the service are either null SAPs or Dot1q default
pbb-epipe — keyword used to create a pbb-epipe.
svc-sap-type — Specifies the type of service and allowed SAPs in the service.
vpn vpn-id — Specifies the VPN ID number which allows you to identify virtual private networks
pbb-tunnel
Syntax pbb-tunnel service-id backbone-dest-mac {mac-name | ieee-mac} isid ISID
no pbb-tunnel
Context config>service>epipe
This command configures a Provider Backbone Bridging (PBB) tunnel with Backbone VPLS (B-
Description
VPLS) service information.
service-id — Specifies the B-VPLS service for the PBB tunnel associated with this service.
Parameters
backbone-dest-mac {mac-name | ieee-mac} — Specifies the backbone destination MAC-address
isid ISID — Specifies a 24 bit service instance identifier for the PBB tunnel associated with this
7210 SAS M Services Guide
SAP for svc-sap-type dot1q-preserve.
1 — 4094
Values
stripped after packet matches the SAP.
SAPs.
(VPNs) by a VPN ID. If this parameter is not specified, the VPN ID uses the same service ID
number.
1 — 2147483647
Values
null (0)
Default
1 — 2147483648
Values
for PBB packets.
service. As part of the PBB frames, it is used at the destination PE as a demultiplexor field.
0 — 16777215
Values
VPLS Service Commands
Page 463