Alcatel-Lucent 7210 SAS M Service Manual page 788

Show, Clear, Debug Commands
Sample Output
*A:ALA-12# show router 3 static-route
==============================================================================
Route Table
==============================================================================
IP Addr/mask
------------------------------------------------------------------------------
192.168.250.0/24
192.168.252.0/24
192.168.253.0/24
192.168.253.0/24
192.168.254.0/24
==============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 static-route 192.168.250.0/24
==============================================================================
Route Table
==============================================================================
IP Addr/mask
------------------------------------------------------------------------------
192.168.250.0/24
==============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 static-route preference 4
=============================================================================
Route Table
==============================================================================
IP Addr/mask
------------------------------------------------------------------------------
192.168.254.0/24
==============================================================================
Page 788
Label
Next Hop
Interface
Active
No. of Routes:
Pref Metric Type Nexthop
5
5
5
5
4
Pref Metric Type Nexthop
5
Pref Metric Type Nexthop
4
Description (Continued)
ID — The static route is an indirect route, where the
type of route is the non-directly connected next hop.
NH — The route is a static route with a directly connected next hop.
The for this type of route is either the next hop IP address or
Nexthop
an egress IP interface name.
The next hop for the static route destination.
The egress IP interface name for the static route.
— indicates there is no current egress interface because the
n/a
static route is inactive or a black hole route.
N — The static route is inactive; for example, the static route is dis-
abled or the next hop IP interface is down.
Y — The static route is active.
The number of routes displayed in the list.
1 ID 10.200.10.1
1 NH 10.10.0.254
1 NH to-ser1
1 NH 10.10.0.254
1 BH black-hole
1 ID 10.200.10.1
1 BH black-hole
nexthop
Interface
to-ser1
n/a
n/a
n/a
n/a
Interface
to-ser1
Interface
n/a
7210-SAS M Services Guide
for this
Active
Y
N
N
N
Y
Active
Y
Active
Y