Alcatel-Lucent 7210 SAS M Service Manual page 668

VPRN Service Configuration Commands
This configuration parameter can be set at three levels: global level (applies to all peers), group level
(applies to all peers in peer-group) or neighbor level (only applies to specified peer). The most
specific value is used.
The no form of the command used at the global level reverts to default where the MED is not
advertised.
The no form of the command used at the group level reverts to the value defined at the global level.
The no form of the command used at the neighbor level reverts to the value defined at the group level.
no med-out
Default
number — The MED path attribute value, expressed as a decimal integer.
Parameters
igp-cost — The MED is set to the IGP cost of the given IP prefix.
min-as-origination
Syntax min-as-origination seconds
no min-as-origination
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
This command configures the minimum interval, in seconds, at which a path attribute, originated by
Description
the local router, can be advertised to a peer.
This configuration parameter can be set at three levels: global level (applies to all peers), group level
(applies to all peers in peer-group) or neighbor level (only applies to specified peer). The most
specific value is used.
The no form of the command used at the global level reverts to default.
The no form of the command used at the group level reverts to the value defined at the global level.
The no form of the command used at the neighbor level reverts to the value defined at the group level.
15 seconds
Default
seconds — The minimum path attribute advertising interval in seconds, expressed as a decimal
Parameters
Page 668
0 — 4294967295
Values
integer.
2 — 255
Values
7210 SAS M Services Guide