Alcatel-Lucent 7210 SAS M Service Manual page 762

Show, Clear, Debug Commands
Page 762
Label
Local Pref
MED Out
Min Route Advt.
Min AS Originate
Multihop
Multipath
Prefix Limit
Passive
Next Hop Self
Aggregator ID 0
Remove Private
Damping
Description (Continued)
Authentication
None — No authentication is configured.
MD5 — MD5 authentication is configured.
The configured or inherited local preference value.
The configured or inherited MED value assigned to advertised routes
without a MED attribute.
The minimum amount of time that must pass between route updates for
the same IP prefix.
The minimum amount of time that must pass between updates for a
route originated by the local router.
The maximum number of router hops a BGP connection can traverse.
The configured or inherited multipath value, determining the maxi-
mum number of ECMP routes BGP can advertise to the RTM.
No Limit — No route limit assigned to the BGP peer group.
1 - 4294967295 — The maximum number of routes BGP can
learn from a peer.
Disabled — BGP attempts to establish BGP connections with
neighbors in the specified peer group.
Enabled — BGP will not actively attempt to establish BGP connec-
tions with neighbors in the specified peer group.
Disabled — BGP is not configured to send only its own IP address
as the BGP nexthop in route updates to neighbors in the peer group.
Enabled — BGP sends only its own IP address as the BGP nexthop
in route updates to neighbors in the specified peer group.
Disabled — BGP is not configured to set the aggregator ID to
0.0.0.0 in all originated route aggregates sent to the neighbor in the
peer group.
Enabled — BGP is configured to set the aggregator ID to 0.0.0.0 in
all originated route aggregates sent to the neighbor in the peer group.
Disabled — BGP will not remove all private AS numbers from the
AS path attribute in updates sent to the neighbor in the peer group.
Enabled — BGP removes all private AS numbers from the AS path
attribute in updates sent to the neighbor in the peer group.
Disabled — The peer group is configured not to dampen route
flaps.
7210-SAS M Services Guide