Service Management Tasks; Modifying Vpls Service Parameters - Alcatel-Lucent 7210 SAS M Service Manual

Service Management Tasks

This section discusses the following service management tasks:
•
•
•
•
•

Modifying VPLS Service Parameters

You can change existing service parameters. The changes are applied immediately.
To display a list of services, use the show service service-using vpls command. Enter the
parameter such as description SAP and then enter the new information.
The following displays a modified VPLS configuration.
*A:ALA-1>config>service>vpls# info
----------------------------------------------
----------------------------------------------
*A:ALA-1>config>service>vpls#
7210 SAS M Services Guide
Modifying VPLS Service Parameters on page 351
Modifying Management VPLS Parameters on page 352
Deleting a Management VPLS on page 352
Disabling a Management VPLS on page 353
Deleting a VPLS Service on page 354
description "This is a different description."
disable-learning
disable-aging
discard-unknown
local-age 500
stp
shutdown
exit
sap 1/1/5:22 create
description "VPLS SAP"
exit
exit
no shutdown
Virtual Private LAN Services
Page 351