Figure 11: 0-6 Sub-Ring Homed To Vpls - Alcatel-Lucent 7210 SAS M Service Manual

no shutdown
exit
# Control Channel for the Sub-Ring using a virtual link. This is
# a data channel as far as Ring 1 configuration. Other Ring 1
# nodes also need this VID to be configured.
vpls 100 customer 1 create
description "Control VID 100 for Ring 2 Interconnection"
split-horizon-group "s1" create //Ring Split horizon Group
exit
stp shutdown
sap 1/1/1:100 split-horizon-group "s1" eth-ring 1 create
exit
sap 1/1/4:100 split-horizon-group "s1" eth-ring 1 create
exit
sap 1/1/3:100 eth-ring 2 create
exit
no shutdown
exit
Note: If the Sub Ring has been configured as a non-virtual-link, the configuration above will be
the following:
vpls 100 customer 1 create
description "Control VID 100 for Ring 2 Interconnection"
sap 1/1/3:100 eth-ring 2 create
exit
no shutdown
exit
7210 SAS M Services Guide
stp shutdown
stp shutdown
stp shutdown
stp shutdown

Figure 11: 0-6 Sub-Ring Homed to VPLS

Services
Page 57