Alcatel-Lucent 7210 SAS M Service Manual page 738

Show, Clear, Debug Commands
mac ieee-address — Displays only ARP entries in the ARP table with the specified 48-bit MAC
sap sap-id — Displays SAP information for the specified SAP ID. See
port id — Specifies matching service ARP entries associated with the specified IP interface.
ip-address — The IP address of the interface for which to display matching ARP entries.
ip-int-name — The IP interface name for which to display matching ARPs.
Show Service-ID ARP — The following table describes show service-id ARP output fields.
Output
Sample Output
*A:ALA-12# show service id 2 arp
==============================================================================
ARP Table
==============================================================================
IP Address
------------------------------------------------------------------------------
190.11.1.1
==============================================================================
*A:ALA-12#
base
Syntax base
Context show>service>id
Page 738
address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff
where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
All MAC addresses.
Default
Descriptions on page 939
1.0.0.0 — 223.255.255.255
Values
Label
Service ID
MAC
Source-Identifier
Type
Age
Interface
Port
MAC Address
00:03:fa:00:08:22 Other
for command syntax.
The service ID number.
The specified MAC address
The location the MAC is defined.
— FDB entries created by management.
Static
Learned — Dynamic entries created by the learning process.
OAM — Entries created by the OAM process.
The time elapsed since the service was enabled.
The interface applied to the service.
The port where the SAP is applied.
Type Age
00:00:00
Common CLI Command
Description
Interface
ies-100-190.11.1
7210-SAS M Services Guide
Port
1/1/11:0