Alcatel-Lucent 7210 SAS M Service Manual page 128

Circuit Emulation (Cpipe) Services
In the previous example, 16 frames were accumulated in the CESoPSN packet. In this case, the
packetization delay (D) can be calculated as follows:
Table 9
packetization delay as they apply to the number of timeslots (N) that contribute to the packet
payload. The default values are set by the operating system as follows:
•
•
•
•
Page 128
D = 125 µs/frame * 16 frames
= 2.000 ms
shows the default and minimum values for frames per packet, payload size, and
For N = 1, the default is 64 frames/packet
For 2 ≤ N≤4, the default is 32 frames/packet
For 5 ≤ N ≤ 15, the default is 16 frames/packet
For N ≥16, the default is 8 frames/packet
7210 SAS M Services Guide