Alcatel-Lucent 7210 SAS M Service Manual page 650

VPRN Service Configuration Commands
group-prefix
Syntax [no] group-prefix {grp-ip-address/mask | grp-ip-address netmask}
Context config>service>vprn>pim>rp>static
The group-prefix for a static-rp defines a range of multicast-ip-addresses for which a certain RP is
Context
applicable.
The no form of the command removes the criterion.
none
Default
grp-ip-address — Specify the multicast IP address.
Parameters
mask — Defines the mask of the multicast-ip-address.
netmask — Enter the subnet mask in dotted decimal notation.
override
Syntax [no] override
Context config>service>vprn>pim>rp>static
This command changes the precedence of static RP over dyanamically learned Rendezvous Point
Description
(RP).
When enabled, the static group-to-RP mappings take precedence over the dynamically learned
mappings.
no override
Default
spt-switchover-threshold
Syntax spt-switchover-threshold {grp-ip-address/mask | grp-ip-address netmask} spt-threshold
no spt-switchover-threshold {grp-ip-address/mask | grp-ip-address netmask}
Context config>service>vprn>pim
This command configures a shortest path tree (SPT tree) switchover threshold for a group prefix.
Description
grp-ip-address — Specify the multicast group address.
Parameters
mask — Defines the mask of the multicast-ip-address.
netmask — Enter the subnet mask in dotted decimal notation.
Page 650
4 — 32
Values
0.0.0.0 — 255.255.255.255 (network bits all 1 and host bits all 0)
Values
4 — 32
Values
0.0.0.0 — 255.255.255.255 (network bits all 1 and host bits all 0)
Values
7210 SAS M Services Guide