Modifying Sdps - Alcatel-Lucent 7210 SAS M Service Manual

Service Management Tasks

Modifying SDPs

Note : SDPs are not supported by 7210 SAS-M devices configured in Access Uplink mode.
To access a specific SDP, you must specify the SDP ID. To display a list of SDPs, use the
service sdp
new information.
NOTE: Once created, you cannot modify the SDP encapsulation type.
CLI Syntax: config>service# sdp sdp-id
Example
Page 86
command. Enter the parameter, such as
:
config>service# sdp 79
config>service>sdp# description "Path-to-107"
config>service>sdp# shutdown
config>service>sdp# far-end "10.10.10.107"
config>service>sdp# path-mtu 1503
config>service>sdp# no shutdown
, , and
description far-end
7210 SAS M Services Guide
show
, and then enter the
lsp