Ies Show Commands - Alcatel-Lucent 7210 SAS M Service Manual

IES Show Commands

IES
customer
Syntax customer [customer-id] [site customer-site-name]
Context show>service
This command displays service customer information.
Description
customer-id — Displays only information for the specified customer ID.
Parameters
site customer-site-name — Specifies the customer site which is an anchor point for an ingress and
Show Customer Command Output — The following table describes show customer command
Output
output fields:
7210-SAS M Services Guide
All customer IDs display
Default
1 — 2147483647
Values
egress virtual scheduler hierarchy.
Label
Customer-ID
Contact
Description
Phone
Total Customers
Multi-service site
Site
Description
Assignment
I. Sched Pol
E. Sched Pol
Service Association
Service-ID
SAP
The ID that uniquely identifies a customer.
The name of the primary contact person.
Generic information about the customer.
The phone/pager number to reach the primary contact person.
The total number of customers configured.
Multi-service site name. A multi-service customer site is a group of
SAPs with common origination and termination points.
Information about a specific customer's multi-service site.
The port ID, MDA, or card number, where the SAP's that are members
of this multi- service site are defined.
The ingress QoS scheduler policy assigned to this multi-service site.
The egress QoS scheduler policy assigned to this multi-service site.
The ID that uniquely identifies a service.
Specifies the SAP assigned to the service.
IES Show Commands
Description
Page 699