Table 9: Default And Minimum Payload Size For Cesopsn Without Cas - Alcatel-Lucent 7210 SAS M Service Manual

Virtual Leased Line Services

Table 9: Default and Minimum Payload Size for CESoPSN without CAS

Structured T1/E1 CES with CAS
Structured circuit emulation with CAS is supported for T1 and E1 circuits.
Structured CES with CAS service is configured by choosing cesopsn-cas as the vc-type when
creating a Cpipe service. The DS1 or E1 service on the port associated with the Cpipe SAP should
be configured to support CAS (via the signal-mode {cas} command) before configuring the Cpipe
service to support DS1 or E1 with CAS. Refer to the 7210 SAS Interface Configuration Guide for
information on configuring signal mode.
7210 SAS M Services Guide Page 129