Alcatel-Lucent 7210 SAS M Service Manual page 669

min-route-advertisement
Syntax min-route-advertisement seconds
no min-route-advertisement
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
This command configures the minimum interval, in seconds, at which a prefix can be advertised to a
Description
peer.
This configuration parameter can be set at three levels: global level (applies to all peers), group level
(applies to all peers in peer-group) or neighbor level (only applies to specified peer). The most
specific value is used.
The no form of the command reverts to default values.
30 seconds
Default
seconds — The minimum route advertising interval, in seconds, expressed as a decimal integer.
Parameters
multihop
Syntax multihop ttl-value
no multihop
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
This command configures the time to live (TTL) value entered in the IP header of packets sent to an
Description
EBGP peer multiple hops away.
This parameter is meaningful only when configuring EBGP peers. It is ignored if set for an IBGP
peer.
The no form of the command is used to convey to the BGP instance that the EBGP peers are directly
connected.
The no form of the command reverts to default values.
1 — EBGP peers are directly connected.
Default
64 — IBGP
ttl-value — The TTL value, expressed as a decimal integer.
Parameters
7210 SAS M Services Guide
1— 255
Values
1 — 255
Values
Virtual Private Routed Network Services
Page 669