Configuring Epipe Sap Parameters; Local Epipe Saps - Alcatel-Lucent 7210 SAS M Service Manual

Configuring Epipe SAP Parameters

A default QoS policy is applied to each ingress SAP. Additional QoS policies can be configured in
the config>qos context. Filter policies are configured in the
explicitly applied to a SAP. There are no default filter policies.
Use the following CLI syntax to create:
•
•
Epipe SAP
CLI Syntax: config>service# epipe service-id [customer customer-id]
7210 SAS M Services Guide
Local Epipe SAPs on page 182
Distributed Epipe Service on page 184
sap sap-id
accounting-policy policy-id
collect-stats
description description-string
no shutdown
egress
filter {ip ip-filter-name | mac mac-filter-name}
ingress
filter {ip ip-filter-name | mac mac-filter-name}
qos policy-id
Virtual Leased Line Services
context and
config>filter
Page 181