Alcatel-Lucent 7210 SAS M Service Manual page 227

Connection Profile Commands
connection-profile
Syntax connection-profile conn-prof-id [create]
no connection-profile conn-prof-id
Context config
This command creates a list of VLAN values to be assigned to a Dot1q SAP in an Epipe service.
Description
A connection profile can only be assigned to a Dot1q SAP which is part of an Epipe Service.
The no form of this command deletes the profile from the configuration.
none
Default
conn-prof-id — Specifies the profile number.
Parameters
ethernet
Syntax ethernet
Context config>connprof
Provides the context to configure the VLAN ranges values.
Description
none
Default
ranges
Syntax no ranges
ranges vlan-ranges [vlan-ranges...(upto 32 max)]
Context config>connprof>ethernet
Specifies the list of VLAN ranges or individual VLAN ID to be used for mapping the given VLANs
Description
to the Epipe SAP.
The system validates that the values specified are valid VLAN ID in the range 0-4094 (VLAN ID
4095 is reserved). Ranges are specified in the format 'a-b ', the expression (a < b) should be true. Up
to about 32 individual VLAN values or VLAN ranges can be specified. A maximum of up to 8 VLAN
ranges are allowed per connection profile.
none
Default
7210 SAS M Services Guide
1 — 8000
Values
Virtual Leased Line Services
Page 227