Basic Configuration - Alcatel-Lucent 7210 SAS M Service Manual

Hide thumbs Also See for 7210 SAS M:
Table of Contents

Advertisement

Configuring a VPLS Service with CLI

Basic Configuration

The following fields require specific input (there are no defaults) to configure a basic VPLS
service:
The following example displays a sample configuration of a local VPLS service on ALA-1.
For 7210 SAS-M devices configured in access-uplink mode:
*A:SAS-M-A0-2>config>service>vpls# info
----------------------------------------------
----------------------------------------------
*A:SAS-M-A0-2>config>service>vpls#
*A:ALA-1>config>service>vpls# info
----------------------------------------------
...
----------------------------------------------
*A:ALA-1>config>service>vpls#
*A:ALA-1>config>service# info
----------------------------------------------
...
Page 306
Customer ID (refer to
Configuring Customers on page
For a local service, configure two SAPs, specifying local access ports and encapsulation
values.
For a distributed service, configure a SAP and an SDP ( only for 7210 SAS-M devices in
network mode) for each far-end node.
stp
shutdown
exit
sap 1/1/1:10.* create
ingress
filter mac 1
exit
exit
sap 1/1/2:10.* create
exit
no shutdown
vpls 9001 customer 6 create
description "Local VPLS"
stp
shutdown
exit
sap 1/2/2:0 create
description "SAP for local service"
exit
sap 1/1/5:0 create
description "SAP for local service"
exit
no shutdown
vpls 7 customer 7 create
stp
shutdown
exit
sap 1/1/21 create
69)
7210 SAS M Services Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents