Alcatel-Lucent 7210 SAS M Service Manual page 787

===============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 static-arp to-ser1
==============================================================================
ARP Table
==============================================================================
IP Address
------------------------------------------------------------------------------
10.200.0.253
===============================================================================
S*A:ALA-12#
*A:ALA-12# show router 3 static-arp mac 00:00:5a:40:00:01
==============================================================================
ARP Table
==============================================================================
IP Address
-------------------------------------------------------------------------------
10.200.0.253
==============================================================================
*A:ALA-12#
static-route
Syntax static-route [ip-prefix /mask] | [preference preference] | [next-hop ip-addr] [detail]
Context show>router
This command displays the static entries in the routing table.
Description
If no options are present. all static routes are displayed sorted by prefix.
ip-prefix /mask — Displays static routes only matching the specified ip-prefix and mask.
Parameters
preference preference — Only displays static routes with the specified route preference.
next-hop ip-addr — Only displays static routes with the specified next hop IP address.
detail — Displays detailed information about the static route.
Show Static Route Output — The following table describes the output fields for the static route
Output
table:
7210-SAS M Services Guide
MAC Address
00:00:5a:40:00:01 00:00:00 Sta
MAC Address
00:00:5a:40:00:01 00:00:00 Sta
0 — 65535
Values
Label
IP Addr/mask
Pref
Metric
Type
Age Type Interface
Age Type Interface
The static route destination address and mask.
The route preference value for the static route.
The route metric value for the static route.
BH — The static route is a black hole route. The
type of route is
black-hole
VPRN Show Commands
to-ser1
to-ser1
Description
Nexthop
.
for this
Page 787