Alcatel-Lucent 7210 SAS M Service Manual page 761

group
Syntax group [name] [detail]
Context show>router>bgp
This command displays group information for a BGP peer group. This command can be entered with
Description
or without parameters.
When this command is entered without a group name, information about all peer groups displays.
When the command is issued with a specific group name, information only pertaining to that specific
peer group displays.
The 'State' field displays the BGP group's operational state. Other valid states are:
name — Displays information for the BGP group specified.
Parameters
detail — Displays detailed information.
Standard and Detailed Group Output — The following table describes the standard and
Output
detailed command output fields for a BGP group:
Sample Output
7210-SAS M Services Guide
Up - BGP global process is configured and running.
Down - BGP global process is administratively shutdown and not running.
Disabled - BGP global process is operationally disabled. The process must be restarted by the
operator.
Label
Group
Group Type
State
Peer AS
Local AS
Local Address
Loop Detect
Connect Retry
BGP group name
No Type — Peer type not configured.
External — Peer type configured as external BGP peers.
Internal — Peer type configured as internal BGP peers.
Disabled — The BGP peer group has been operationally disabled.
Down — The BGP peer group is operationally inactive.
Up — The BGP peer group is operationally active.
The configured or inherited peer AS for the specified peer group.
The configured or inherited local AS for the specified peer group.
The configured or inherited local address for originating peering for
the specified peer group.
The configured or inherited loop detect setting for the specified peer
group.
The configured or inherited connect retry timer value.
VPRN Show Commands
Description
Page 761