Alcatel-Lucent 7210 SAS M Service Manual page 685

eth-ring
Syntax eth-ring [status]
eth-ring ring-index [path {a|b}]
Context show
This command displays the Ethernet rings information.
Description
status — Displays the status information of the Ethernet rings configured on the system.
Parameters
path {a|b} — Displays information related to the configured Ethernet rings.
ring-index — Specifies the ring index of the Ethernet ring.
Values
Show Ethernet Ring Status — The following table describes show command output fields.
Output
Ring Id
Admin State
Oper State
Path Information
Path
Tag
State
MEP Information
Ctrl-MEP
CC-Intvl
Defects
*A:NS1015C0821>show# eth-ring status
===============================================================================
Ethernet Ring (Status information)
===============================================================================
Ring
ID
-------------------------------------------------------------------------------
1
10
===============================================================================
7210 SAS M Services Guide
1—128
Label
The ring identifier
Displays the administrative state
Displays the operational state
Displays the path information
Displays the tag information
Displays the state of the path
Displays the Ctrl-MEP information
Displays the Ctrl-Interval information
Displays the defects
Admin Oper Path Information
State State Path
Up Up a - 1/1/1
b - 1/1/2
Down Down a - N/A
b - N/A
Description
Tag State Ctrl-MEP CC-Intvl Defects
100 Up Yes
100 Up Yes
- -
- -
Service Commands
MEP Information
100ms -----
100ms -----
- -----
- -----
Page 685