Re-Enabling An Epipe Service; Deleting An Epipe Service - Alcatel-Lucent 7210 SAS M Service Manual

Configuring a VLL Service with CLI

Re-Enabling an Epipe Service

To re-enable an Epipe service that was shut down.
CLI Syntax: config>service# epipe service-id
Example:config>service# epipe 2

Deleting an Epipe Service

Perform the following steps prior to deleting an Epipe service:
1. Shut down the SAP.
2. Delete the SAP.
3. Shut down the service.
Use the following CLI syntax to delete an Epipe service:
CLI Syntax: config>service
Example
Page 200
no shutdown
config>service>epipe# no shutdown
config>service>epipe# exit
[no] epipe service-id
shutdown
[no] sap sap-id
shutdown
:
config>service# epipe 2
config>service>epipe# sap 1/1/3:21
config>service>epipe>sap# shutdown
config>service>epipe>sap# exit
config>service>epipe# no sap 1/1/3:21
config>service>epipe# epipe 2
config>service>epipe# shutdown
config>service>epipe# exit
config>service# no epipe 2
7210 SAS M Services Guide