Alcatel-Lucent 7210 SAS M Service Manual page 733

7210-SAS M Services Guide
Label
Vrf Target
Vrf Import
Vrf Export
Description
SAP Count
SDP Bind Count
Split Horizon
Group
Description
Last Changed
Service Destination Points (SDPs)
SDP Id
Type
Admin Path MTU
Oper Path MTU
Delivery
Admin State
Oper State
Ingress Label
Egress Label
Ingress Filter
Egress Filter
Far End
Last Changed
Signaling
Specifies the VRF target applied to this service.
Specifies the VRF import policy applied to this service.
Specifies the VRF export policy applied to this service.
Generic information about the service.
The number of SAPs specified for this service.
The number of SDPs bound to this service.
Name of the split horizon group for this service.
Description of the split horizon group.
The date and time of the most recent management-initiated change to
this split horizon group.
The SDP identifier.
Indicates whether this Service SDP binding is a spoke or a mesh.
The desired largest service frame size (in octets) that can be transmit-
ted through this SDP to the far-end router, without requiring the packet
to be fragmented.
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Specifies the type of delivery used by the SDP: GRE or MPLS.
The administrative state of this SDP.
The operational state of this SDP.
The label used by the far-end device to send packets to this device in
this service by this SDP.
The label used by this device to send packets to the far-end device in
this service by this SDP.
The ID of the ingress filter policy.
The ID of the egress filter policy.
Specifies the IP address of the remote end of the MPLS tunnel defined
by this SDP.
The date and time of the most recent change to this customer.
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on this SDP.
VPRN Show Commands
Description
Page 733