Alcatel-Lucent 7210 SAS M Service Manual page 405

20
Default
hops-count — Specifies the maximum number of hops.
Parameters
mst-name
Syntax mst-name region-name
no mst-name
Context config>service>vpls>stp
This command defines an MST region name. Two bridges are considered as a part of the same MST
Description
region as soon as their configuration of the MST region name, the MST-revision and VLAN-to-
instance assignment is identical.
The no form of this command removes region-name from the configuration.
no mst-name
Default
region-name — Specifies an MST-region name up to 32 characters in length.
Parameters
mst-revision
Syntax mst-revision revision-number
Context config>service>vpls>stp
This command defines the MST configuration revision number. Two bridges are considered as a part
Description
of the same MST region if their configured MST-region name, MST-revision, and VLAN-to-instance
are identical.
The no form of this command returns MST configuration revision to its default value.
0
Default
revision-number — Specifies the MSTP region revision number to define the MSTP region.
Parameters
path-cost
Syntax path-cost sap-path-cost
no path-cost
Context config>service>vpls>sap>stp
config>service>vpls>spoke-sdp>stp
This command configures the Spanning Tree Protocol (STP) path cost for the SAP or spoke SDP.
Description
7210 SAS M Services Guide
1 — 40
Values
0 — 65535
Values
Virtual Private LAN Services
Page 405