Alcatel-Lucent 7210 SAS M Service Manual page 815

===============================================================================
*A:Dut-A>show#
all
Syntax all
Context show>service>id
This command displays detailed information for all aspects of the service.
Description
Show service ID Output — The following table describes the output fields when the all option is
Output
specified:
7210 SAS M Services Guide
Label
Service Id
VPN Id
Service Type
VLL Type
SDP Id
Description
Customer Id
Last Mgmt Change
Endpoint
Flags
SAP Count
SDP Bind Count
Service Destination Points (SDPs)
SDP Id
Type
Admin Path MTU
The service identifier.
The number which identifies the VPN.
Specifies the type of service.
Specifies the VLL type.
The SDP identifier.
Generic information about the service.
The customer identifier.
The date and time of the most recent management-initiated change.
Specifies the name of the service endpoint.
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, L2OperDown, RelearnLimitEx-
ceeded, RxProtSrcMac, ParentIfAdminDown, NoSapIpipeCeIpAddr,
TodResourceUnavail, TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing, SapIngressNamed-
PoolMismatch, SapEgressNamedPoolMismatch, NoSapEpipeRing-
Node.
The number of SAPs specified for this service.
The number of SDPs bound to this service.
The SDP identifier.
Indicates whether this Service SDP binding is a spoke or a mesh.
The desired largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to be
fragmented.
VLL Show Commands
Description
Page 815