Alcatel-Lucent 7210 SAS M Service Manual page 646

VPRN Service Configuration Commands
bootstrap-export
Syntax bootstrap-export policy-name [policy-name... up to five]
no bootstrap-export
Context config>service>vprn>pim>rp
This command exports policies to control the flow of bootstrap messages from the RP. Up to five
Description
policies can be defined.
The no form of this command removes the specified policy names from the configuration.
none
Default
policy-name — Specify the policy name. The policy statement must already be configured in the
Parameters
bootstrap-import
Syntax bootstrap-import policy-name [policy-name... up to five]
no bootstrap-import policy-name [policy-name... up to five]
Context config>service>vprn>pim>rp
This command imports policies to control the flow of bootstrap messages into the RP. Up to five
Description
policies can be defined.
The no form of this command removes the specified policy names from the configuration.
none
Default
policy-name — Specify the policy name. The policy statement must already be configured in the
Parameters
bsr-candidate
Syntax bsr-candidate
Context config>service>vprn>pim>rp
This command enables the context to configure a local rendezvous point (RP) of a PIM protocol
Description
instance.
Enabled when PIM is enabled.
Default
Page 646
config>router>policy-options context.
config>router>policy-options context.
7210 SAS M Services Guide