Alcatel-Lucent 7210 SAS M Service Manual page 875

7210 SAS M Services Guide
Label
SAP Count
SDP Bind Count
Split Horizon
Group
Description
Last Changed
SDP Id
Type
Admin Path MTU
Oper Path MTU
Delivery
Admin State
Oper State
Ingress Label
Egress Label
Ingress Filter
Egress Filter
Far End
Last Changed
Hello Time
Hello Msg Len
Max Drop Count
Description (Continued)
The number of SAPs specified for this service.
The number of SDPs bound to this service.
Name of the split horizon group for this service.
Description of the split horizon group.
The date and time of the most recent management-initiated change to
this split horizon group.
The SDP identifier.
Indicates whether this service SDP binding is a spoke or a mesh.
The desired largest service frame size (in octets) that can be transmit-
ted through this SDP to the far-end router, without requiring the packet
to be fragmented.
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Specifies the type of delivery used by the SDP: GRE or MPLS.
The administrative state of this SDP.
The operational state of this SDP.
The label used by the far-end device to send packets to this device in
this service by this SDP.
The label used by this device to send packets to the far-end device in
this service by this SDP.
The ID of the ingress filter policy.
The ID of the egress filter policy.
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
The date and time of the most recent change to this customer.
Specifies how often the SDP echo request messages are transmitted on
this SDP.
Specifies the length of the SDP echo request messages transmitted on
this SDP.
Specifies the maximum number of consecutive SDP Echo Request
messages that can be unacknowledged before the keepalive protocol
reports a fault.
VPLS Show Commands
Page 875