Configuring a VLL Service with CLI
Creating an Epipe Service in Network Mode
Use the following CLI syntax to create an Epipe service.
CLI Syntax: config>service# epipe service-id [customer customer-id] [cre-
ate] [vpn vpn-id]
The following displays an Epipe configuration example:
A:ALA-1>config>service# info
-------------------------------------------
...
----------------------------------------------
A:ALA-1>config>service#
Creating an Epipe Service (for 7210 SAS-M in access uplink mode)
Use the following CLI syntax to create an Epipe service:
CLI Syntax: config>service# epipe service-id [customer customer-id] [cre-
ate] [svc-sap-type {null-star | dot1q | dot1q-preserve | any}] [cus-
tomer- vid vlan-id] description description-string no shutdown
A:ALA-1>config>service# info
-------------------------------------------
...
epipe 500 customer 1 svc-sap-type null-star create
exit
----------------------------------------------
A:ALA-1>config>service#
Page 180
description description-string
no shutdown
epipe 1101 customer 1 vpn 1101 create
description "Default epipe description for service id 1101"
no shutdown
exit
description "Local Epipe Service with NULL SVC_SAP_TYPE"
no shutdown
7210 SAS M Services Guide