Deleting A Vpls Service; Disabling A Vpls Service - Alcatel-Lucent 7210 SAS M Service Manual

Service Management Tasks

Deleting a VPLS Service

A VPLS service cannot be deleted until SAPs and SDPs (not applicable for 7210 SAS-M devices
configured in Access uplink mode) are unbound (deleted), interfaces are shutdown, and the service
is shutdown on the service level.
Use the following CLI syntax to delete a VPLS service:
CLI Syntax: config>service

Disabling a VPLS Service

You can shut down a VPLS service without deleting the service parameters.
CLI Syntax: config>service> vpls service-id
Example
Page 354
[no] vpls service-id
shutdown
[no] spoke-sdp sdp-id
shutdown
sap sap-id
no sap sap-id
shutdown
[no] shutdown
:
config>service# vpls 1
config>service>vpls# shutdown
config>service>vpls# exit
7210 SAS M Services Guide