Alcatel-Lucent 7210 SAS M Service Manual page 373

VPLS Service Configuration Commands
Generic Commands
shutdown
Syntax [no] shutdown
Context config>service>vpls
config>service>vpls>snooping
config>service>vpls>igmp-snooping
config>service>vpls>sap
config>service>vpls>sap>stp
config>service>vpls>stp
config>service>vpls>spoke-sdp>stp
config>service>vpls>bgp-ad
This command administratively disables an entity. When disabled, an entity does not change, reset, or
Description
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown command
is entered, the service becomes administratively up and then tries to enter the operationally up state.
Default administrative states for services and service entities is described below in Special Cases.
The no form of this command places the entity into an administratively enabled state.
description
Syntax description description-string
no description
Context config>service>vpls
config>service>vpls>split-horizon-group
config>service>vpls>igmp-snooping>mvr
config>service>vpls>sap
config>service>vpls>spoke-sdp
config>service>pw-template>split-horizon-group
This command creates a text description stored in the configuration file for a configuration context.
Description
The description command associates a text string with a configuration context to help identify the
content in the configuration file.
The no form of this command removes the string from the configuration.
7210 SAS M Services Guide
Virtual Private LAN Services
Page 373