Alcatel-Lucent 7210 SAS M Service Manual page 226

VLL Service Configuration Commands
bit-error-threshold
Syntax bit-error-threshold errors
no bit-error-threshold
Context config>service>epipe>sap>eth-cfm>mep>eth-test-enable
This command is used to specify the threshold value of bit errors.
Description
one-way-delay-threshold
Syntax one-way-delay-threshold seconds
Context config>service>vpls>sap>eth-cfm>mep
This command enables/disables eth-test functionality on MEP.
Description
seconds — Specifies the one way delay threshold in seconds.
Parameters
Page 226
0-600
Values
3
Default
7210 SAS M Services Guide