Configuring Ies Interface Parameters - Alcatel-Lucent 7210 SAS M Service Manual

Configuring an IES Service with CLI

Configuring IES Interface Parameters

in network mode
----------------------------------------------
*A:7210-SAS>config>service>ies>if#
----------------------------------------------
The following example displays an IES configuration with interface parameters in access-uplink
mode:
*A:7210-SAS>config>service>ies>if# info
----------------------------------------------
arp-timeout 10000
allow-directed-broadcasts
icmp
exit
ip-mtu 1000
----------------------------------------------
*A:7210-SAS>config>service>ies>if#
Page 512
*A:7210-SAS>config>service>ies>if# info
arp-timeout 10000
allow-directed-broadcasts
icmp
ttl-expired 120 38
exit
arp-populate
ip-mtu 1000
host-connectivity-verify interval 500 timeout 50 retry-count 15
delayed-enable 150
bfd 150 receive 300 multiplier 15 echo-receive 3000
local-proxy-arp
remote-proxy-arp
loopback
ttl-expired 120 38
7210-SAS M Services Guide