Modifying Management Vpls Parameters; Deleting A Management Vpls - Alcatel-Lucent 7210 SAS M Service Manual

Hide thumbs Also See for 7210 SAS M:

Table of Contents

Service Management Tasks

Modifying Management VPLS Parameters

To modify the range of VLANs on an access port that are to be managed by an existing

management VPLS, first the new range should be entered and afterwards the old range removed. If

the old range is removed before a new range is defined, all customer VPLS services in the old

range will become unprotected and may be disabled.

CLI Syntax: config>service# vpls service-id

As with normal VPLS service, a management VPLS cannot be deleted until SAPs and SDPs are

unbound (deleted), interfaces are shutdown, and the service is shutdown on the service level.

Use the following CLI syntax to delete a management VPLS service:

CLI Syntax: config>service

managed-vlan-list

[no] range vlan-range

[no] vpls service-id

[no] spoke-sdp sdp-id

[no] sap sap-id

7210 SAS M Services Guide

Show Quick Links

Table of Contents