Alcatel-Lucent 7210 SAS M Service Manual page 723

Sample Output
*A:ALA-12# show service sap-using sap 1/1
==============================================================================
Service Access Points
==============================================================================
PortId
------------------------------------------------------------------------------
1/1/7:0
1/1/11:0
1/1/7:300
------------------------------------------------------------------------------
Number of SAPs : 3
------------------------------------------------------------------------------
*A:ALA-12#
sdp
Syntax sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
Context show>service
Displays SDP information.
Description
If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
sdp-id — The SDP ID for which to display information.
Parameters
far-end ip-address — Displays only SDPs matching with the specified far-end IP address.
detail — Displays detailed SDP information.
keep-alive-history — Displays the last fifty SDP keepalive events for the SDP.
Show Service SDP — The following table describes show service SDP output fields:
Output
7210-SAS M Services Guide
Label
Opr
SvcId
1
100
300
All SDPs.
Default
1 — 17407
Values
SDPs with any far-end IP address.
Default
SDP summary output.
Default
SDP summary output.
Default
Label
SDP Id
Adm MTU
Description (Continued)
The actual state of the SAP.
SapMTU I.QoS I.Mac/IP E.QoS E.Mac/IP A.Pol
1518 10 8
1514 1 none
1518 10 none
The SDP identifier.
Specifies the largest service frame size (in octets) that can be transmit-
ted through this SDP to the far-end router, without requiring the packet
to be fragmented.
VPRN Show Commands
10 none none
1 none none
10 none 1000
Description
Adm Opr
Up Up
Down Down
Up Up
Page 723