Alcatel-Lucent 7210 SAS M Service Manual page 794

Show, Clear, Debug Commands
protocol
Syntax protocol
Context clear>router>bgp
This command resets the entire BGP protocol. If the AS number was previously changed, the BGP
Description
AS number does not inherit the new value.
id
Syntax id service-id
Context clear>service
clear>service>statistics
This command clears commands for a specific service.
Description
service-id — The ID that uniquely identifies a service.
Parameters
sap
Syntax sap sap-id {all | counters | stp}
Context clear>service>statistics
Clears SAP statistics for a SAP.
Description
sap-id — Specifies the physical port identifier portion of the SAP definition. See
Parameters
spoke-sdp
Syntax spoke-sdp sdp-id:vc-id ingress-vc-label
Context clear>service>id
This command clears and resets the spoke SDP bindings for the service.
Description
sdp-id — The spoke SDP ID to be reset.
Parameters
vc-id — The virtual circuit ID on the SDP ID to be reset.
Page 794
1 — 2147483648
Values
Command Descriptions on page 939
1 — 17407
Values
1 — 4294967295
Values
for command syntax.
7210-SAS M Services Guide
Common CLI