Alcatel-Lucent 7210 SAS M Service Manual page 384

Virtual Private LAN Services
none
Default
policy-id — Specifies an existing policy ID.
Parameters
split-horizon-group group-name — The specified group-name overrides the split horizon group
template settings.
import-rt ext-comm — Specify communities allowed to be accepted from remote PE neighbors. An
extended BGP community in the type:x:y format. The value x can be an integer or IP address.
The type can be the target or origin. x and y are 16-bit integers.
route-distinguisher
Syntax route-distinguisher [ip-addr:comm-val | as-number:ext-comm-val]
no route-distinguisher
Context config>service>vpls>bgp-ad>vsi-id
config>service>vpls>bgp
This command configures the Route Distinguisher (RD) component that will be signaled in the
Description
MPBGP NLRI for L2VPN AFI. This value will be used for BGP-AD, if this feature is configured in
the VPLS service.
If this command is not configured, the RD is automatically built using the BGP-AD VPLS ID. The
following rules apply:
ip-addr:comm-val — Specifies the IP address.
Parameters
ext-comm-val 0 — 4294967295
Page 384
1 — 2147483647
Values
target:{ip-addr:comm-val| 2byte-asnumber:ext-comm-val|4byte-asnumber:comm-
Values
val} ip-addr a.b.c.d
comm-val 0 — 65535
2byte-asnumber 0 — 65535
ext-comm-val 0 — 4294967295
4byte-asnumber 0 — 4294967295
• If BGP AD VPLS-id is configured & no RD is configured under BGP node - RD = VPLS-ID.
• If BGP AD VPLS-id is not configured then an RD value must be configured under BGP node
(this is the case when only BGP VPLS is configured).
• If BGP AD VPLS-id is configured and an RD value is also configured under BGP node, the con-
figured RD value prevails Values and format (6 bytes, other 2 bytes of type is automatically gen-
erated)
ip-addr a.b.c.d
Values
comm-val 0 — 65535
as-number:ext-comm-val — Specifies the AS number and the
Values as-number 1 — 65535
7210 SAS M Services Guide