Alcatel-Lucent 7210 SAS M Service Manual page 416

Virtual Private LAN Services
statistics
Syntax statistics
Context config>service>vpls>sap
This command enables the context to configure the counters associated with SAP ingress and egress.
Description
ingress
Syntax ingress
Context config>service>epipe>sap>statistics
config>service>vpls>sap>statistics
This command enables the context to configure the ingress SAP statistics counter.
Description
counter-mode
Syntax counter-mode {in-out-profile-count| forward-drop-count}
Context config>service>epipe>sap>statistics>ingress
config>service>vpls>sap>statistics>ingress
This command allows the user to set the counter mode for the counters associated with sap ingress
Description
meters (a.ka. policers). A pair of counters is available with each meter. These counters count different
events based on the counter mode value.
Note: The counter mode can be changed if an accounting policy is associated with a SAP. If the
counter mode is changed the counters associated with the meter are reset and the counts are cleared. If
an accounting policy is in use when the counter-mode is changed a new record will be written into the
current accounting file.
Execute the following sequence of commands to ensure a new accounting file is generated when the
counter-mode is changed:
The no form of the command restores the counter mode to the default value.
in-out-profile-count
Default
forward-drop-count — If the counter mode is specified as "forward-drop-count", one counter
Parameters
Page 416
1. Execute the command config>service>epipe/vpls>sap> no collect-stats, to disable writing of
accounting records.
2. Change the counter-mode to the desired value, execute the command config>service>epipe/
vpls>sap>counter-mode {in-out-profile-count| forward-drop-count}.
3. Execute the command config>service>epipe/vpls>sap> collect-stats, to enable writing of
accounting records.
counts the forwarded packets and octets received on ingress of a SAP and another counts the
dropped packets. The forwarded count is the sum of in-profile and out-of-profile packets/octets
received on SAP ingress. The dropped count is count of packets/octets dropped by the policer. A
7210 SAS M Services Guide