Alcatel-Lucent 7210 SAS M Service Manual page 739

Displays basic information about the service ID including service type, description, SAPs and SDPs.
Description
Show Service-ID Base — The following table describes show service-id base output fields:
Output
Sample Output
*A:ALA-12# show service id 1 base
===============================================================================
Service Basic Information
===============================================================================
Service Id
7210-SAS M Services Guide
Label
Service Id
Vpn Id
Service Type
Description
Customer Id
Last Mgmt Change
Adm
Oper
Mtu
Def. Mesh VC Id
SAP Count
SDP Bind Count
Identifier
Type
AdmMTU
OprMTU
Opr
: 1
The service identifier.
Specifies the VPN ID assigned to the service.
Specifies the type of service.
Generic information about the service.
The customer identifier.
The date and time of the most recent management-initiated change to
this customer.
The desired state of the service.
The operating state of the service.
The largest frame size (in octets) that the service can handle.
This object is only valid in services that accept mesh SDP bindings. It is
used to validate the VC ID portion of each mesh SDP binding defined
in the service.
The number of SAPs defined on the service.
The number of SDPs bound to the service.
Specifies the service access (SAP) and destination (SDP) points.
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on the SDP.
Specifies the desired largest service frame size (in octets) that can be
transmitted through this SDP to the far-end ESR, without requiring the
packet to be fragmented.
Specifies the actual largest service frame size (in octets) that can be
transmitted through this SDP to the far-end ESR, without requiring the
packet to be fragmented.
The operating state of the SDP.
Vpn Id
VPRN Show Commands
Description
: 0
Page 739