Alcatel-Lucent 7210 SAS M Service Manual page 779

interface
Syntax interface [{[<ip-address|ip-int-name>][detail]}|summary]
Context show>router
This command displays the router IP interface table sorted by interface index.
Description
ip-address — Only displays the interface information associated with the specified IP address.
Parameters
ip-int-name — Only displays the interface information associated with the specified IP interface
detail — Displays detailed IP interface information.
summary — Displays summary IP interface information for the router.
an IP interface:
Sample Output
*A:7210SAS>show>router interface i1 detail
===============================================================================
Interface Table (Router: Base)
===============================================================================
-------------------------------------------------------------------------------
7210-SAS M Services Guide
name.
— Standard IP Interface Output — The following table describes the standard output fields for
Label
Interface-Name
Type
IP-Address
Adm
Opr
Mode
The IP interface name.
n/a — No IP address has been assigned to the IP interface, so the IP
address type is not applicable.
Pri — The IP address for the IP interface is the Primary address on
the IP interface.
Sec — The IP address for the IP interface is a secondary address on
the IP interface.
The IP address and subnet mask length of the IP interface.
— Indicates no IP address has been assigned to the IP interface.
n/a
Down — The IP interface is administratively disabled.
Up — The IP interface is administratively enabled.
Down — The IP interface is operationally disabled.
Up — The IP interface is operationally enabled.
Network — The IP interface is a network/core IP interface.
Service — The IP interface is a service IP interface.
VPRN Show Commands
Description
Page 779