Alcatel-Lucent 7210 SAS M Service Manual page 763

*A:ALA-12# show router 3 bgp group
===============================================================================
BGP Groups
===============================================================================
Group
-------------------------------------------------------------------------------
Description
Group Type
Peer AS
Local Address
Export Policy
Hold Time
Cluster Id
NLRI
List of Peers
- 10.0.0.1
- 10.0.0.12
- 10.0.0.13
- 10.0.0.14
- 10.0.0.15
Total Peers
===============================================================================
*A:ALA-12#
7210-SAS M Services Guide
Label
Export Policy
Import Policy
Hold Time
Keep Alive
Cluster Id
Client Reflect
NLRI
Preference
List of Peers
Total Peers
Established
: To_AS_40000
: Not Available
: No Type
: 40000
: n/a
: direct2bgp
: 90
: None
: Unicast
: To_Jukebox
: Not Available
: Not Available
: To_ALA-1
: To_H-215
: 5
Description (Continued)
Enabled — The peer group is configured to dampen route flaps.
The configured export policies for the peer group.
The configured import policies for the peer group.
The configured hold time setting.
The configured keepalive setting.
None — No cluster ID has been configured.
Disabled — The BGP route reflector will not reflect routes to this
neighbor.
Enabled — The BGP route reflector is configured to reflect routes
to this neighbor.
The type of NLRI information that the specified peer group can accept.
Unicast — IPv4 unicast routing information can be carried.
The configured route preference value for the peer group.
A list of BGP peers configured under the peer group.
The total number of peers configured under the peer group.
The total number of peers that are in an established state.
State
Local AS
Loop Detect
Keep Alive
Client Reflect
Preference
Established
VPRN Show Commands
: Up
: 65206
: Ignore
: 30
: Enabled
: 170
: 2
Page 763